| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
B-2 BOMBER |
| CSYT |
CHAMFER ANGLE |
10.0 DEGREES MINIMUM AND 20.0 DEGREES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.917 INCHES MINIMUM AND 0.947 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.2646 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON CORNERS |
| AAUB |
HOLE DIAMETER |
0.046 INCHES NOMINAL |
| ASXK |
HOLE QUANTITY |
3 |
| BQDM |
HOLE TYPE |
DRILLED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-DTL-18240 AND QPL-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE |
| MATT |
MATERIAL |
PLASTIC NYLON LOCKING FEATURE |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 FASTENER |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.2500 INCHES |
| AAUM |
LOCKING FEATURE |
PATCH OR PELLET OR STRIP LOCKING FEATURE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4928 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR AMS4967 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE FASTENER |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,6AL-4V TITANIUM ALLOY,SHORT THREAD,REDUCED MAJOR THREAD DIAMETER,SELF-LOCKING AND NONLOCKING,160 KSI FTU |
| FEAT |
SPECIAL FEATURES |
ALL OTHER SURFACES 125 MICROINCHES RA PER ASME B46.1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6403 THRU 6420 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.370 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
