| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
5.5625 INCHES NOMINAL ALL HOLES |
| AGAV |
END ITEM IDENTIFICATION |
A-10 WRP |
| CSYT |
CHAMFER ANGLE |
30.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
5.7183 INCHES MINIMUM AND 5.7653 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.4982 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
5.3125 INCHES NOMINAL |
| AASU |
HEAD HEIGHT |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
STEEL OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
9250 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM ALL HOLES |
| AAWU |
SINGLE SHEAR STRENGTH |
18650 POUNDS PER SQUARE INCH |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT SHEAR,CLOSE TOLERANCE |
| FEAT |
SPECIAL FEATURES |
RATED TENSILE STRENGTHS ARE APPLICABLE ONLY WHEN SHEAR NUT AN320 IS USED |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS464 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.4218 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
