| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
1.625 INCHES MINIMUM AND 1.655 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.0525 INCHES MINIMUM AND 1.0725 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-DTL-18240 AND QPL-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE |
| MATT |
MATERIAL |
PLASTIC NYLON LOCKING FEATURE |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 FASTENER |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.3750 INCHES |
| AAUM |
LOCKING FEATURE |
PATCH LOCKING FEATURE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6349 OR 6382 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OR AMS6415 OR 6484 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OR AMS6322 NATIONAL STD/SPEC 3RD MATERIAL RESPONSE FASTENER |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,ALLOY STEEL,LONG THREAD,REDUCED MAJOR DIA.,SELF-LOCKING AND NONLOCKING,160 KSI FTU |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6603 THRU 6620 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE II,CLASS 2 EMBRITTLEMENT REQUIREMENT PER NAS4002 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| SFTT |
SURFACE TREATMENT |
CADMIUM FASTENER |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.578 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
