| MRC |
Requirement Statement |
Characteristics |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.018 INCHES NOMINAL ALL HOLES |
| AASB |
FASTENER LENGTH |
1.201 INCHES MINIMUM AND 1.231 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
IRON ALLOY 660 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5731 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR AMS5732 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR AMS5737 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR AMS5853 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM ALL HOLES |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,A286 CRES,SHORT THREAD,REDUCED MAJOR THREAD DIA.,SELF-LOCKING AND NONLOCKING,160KSI FTU |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS6303 THRU 6320 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS2700,METHOD I,TYPE 2 OR 8,CLASS 1 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.528 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
