| MRC |
Requirement Statement |
Characteristics |
| AATC |
EXTENDED WASHER DIAMETER |
0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM |
| AATD |
EXTENDED WASHER THICKNESS |
0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
4.169 INCHES MINIMUM AND 4.199 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM |
| AAZH |
HEAD MINOR DIAMETER |
0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
SPLINE EXTENDED WASHER |
| MATT |
MATERIAL |
NICKEL ALLOY 718 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
20900 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5662 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE AND AMS5663 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE AND AMS5962 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAWU |
SINGLE SHEAR STRENGTH |
27650 POUNDS PER SQUARE INCH |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT,TENSION |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES SIDES OF HEAD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS2700, METHOD 1, TYPE 2 OR 8, CLASS 4 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.659 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
