| MRC |
Requirement Statement |
Characteristics |
| AATC |
EXTENDED WASHER DIAMETER |
0.922 INCHES MINIMUM AND 0.932 INCHES MAXIMUM |
| AATD |
EXTENDED WASHER THICKNESS |
0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
1.723 INCHES MINIMUM AND 1.753 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
DRY FILM LUBRICANT |
| AAUR |
GRIP DIAMETER |
0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| AAZH |
HEAD MINOR DIAMETER |
0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
SPLINE EXTENDED WASHER |
| CRHC |
HOLE CONFIGURATION STYLE |
SPLINE |
| AAUB |
HOLE DIAMETER |
0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
4 |
| BQDM |
HOLE TYPE |
DRILLED |
| MATT |
MATERIAL |
NICKEL ALLOY 718 OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
220000 POUNDS PER SQUARE INCH |
| AHYM |
NOMINAL THREAD DIAMETER |
0.7500 INCHES |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT, TENSION |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5962 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS2700, METHOD 1, TYPE 2 OR TYPE 8, CLASS 4 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASA |
THREAD LENGTH |
0.838 INCHES MINIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
