| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| BL-250-S | MONROE ENGINEERING LLC | 6197 | 3 | 2 | 5 | ||||
| BL-250 | MONROE ENGINEERING LLC | 6197 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRHT | DISTANCE FROM CENTER OF EYE TO SHANK END | 1.500 INCHES NOMINAL |
| AATK | EYE INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| CWXM | EYE OUTSIDE WIDTH | 0.500 INCHES NOMINAL |
| AAUA | EYE STOCK THICKNESS | 0.310 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, LATCH |
| AATR | SHANK LENGTH | 1.190 INCHES NOMINAL |
| AATP | SHOULDER THICKNESS | 0.310 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | MONROE ENGINEERING OWNS THE DESIGN CONTROL |
| STYL | STYLE DESIGNATOR | ROUND, CLOSED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.750 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| THSD | THREAD SERIES DESIGNATOR | UNC |
