| MRC |
Requirement Statement |
Characteristics |
| ADDU |
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.130 INCHES MINIMUM FIRST HOLE AND 0.150 INCHES MAXIMUM FIRST HOLE |
| ADDV |
COTTER PIN HOLE DIAMETER |
0.094 INCHES MINIMUM FIRST HOLE AND 0.101 INCHES MAXIMUM FIRST HOLE |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 8740 |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES NUT THREAD |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES STUD THREAD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE |
| AAZE |
SHANK DIAMETER |
0.307 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD |
| STYL |
STYLE DESIGNATOR |
STEPPED |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES SHANK |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| AASA |
THREAD LENGTH |
0.678 INCHES MINIMUM NUT THREAD AND 0.698 INCHES MAXIMUM NUT THREAD |
| AASA |
THREAD LENGTH |
0.865 INCHES MINIMUM STUD THREAD AND 0.885 INCHES MAXIMUM STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
14 STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
24 NUT THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNC STUD THREAD |
| AAJE |
THREAD PITCH DIAMETERS |
+0.3992/+0.4007 INCHES STUD THREAD |
