| MRC |
Requirement Statement |
Characteristics |
| ADCX |
DISTANCE FROM SERRATED PORTION TO END OF STUD THREAD |
0.130 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| ADCT |
DISTANCE FROM SERRATED PORTION TO NUT END |
0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| ADCU |
DISTANCE FROM SERRATED PORTION TO STUD END |
0.425 INCHES MINIMUM AND 0.455 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
269.0 BRINELL STANDARD MINIMUM |
| MATT |
MATERIAL |
STEEL |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES NUT THREAD |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES STUD THREAD |
| AAUM |
LOCKING FEATURE |
RING, LOCK SERRATED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5734 ASSN STD SINGLE MATERIAL RESPONSE |
| CWKL |
SERRATION INCLUDED ANGLE |
102.0 DEGREES NOMINAL |
| ADDW |
SERRATION QUANTITY |
13 |
| ABHP |
OVERALL LENGTH |
1.285 INCHES MINIMUM AND 1.330 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNS STUD THREAD |
| STYL |
STYLE DESIGNATOR |
LOCKED IN |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES NUT THD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
3A NUT THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| AASA |
THREAD LENGTH |
0.425 INCHES MINIMUM NUT THREAD AND 0.455 INCHES MAXIMUM NUT THREAD |
| AASA |
THREAD LENGTH |
0.265 INCHES MINIMUM STUD THREAD AND 0.295 INCHES MAXIMUM STUD THREAD |
| AAJE |
THREAD PITCH DIAMETERS |
+0.2187/+0.2195 INCHES STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
20 STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
32 NUT THREAD |
