| MRC |
Requirement Statement |
Characteristics |
| ADCV |
DISTANCE FROM SHOULDER PORTION TO NUT END |
0.545 INCHES MINIMUM AND 0.575 INCHES MAXIMUM |
| ADDU |
III DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END |
0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM FIRST HOLE |
| ADDV |
III COTTER PIN HOLE DIAMETER |
0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC ALL MATERIAL RESPONSES |
| MATT |
MATERIAL |
STEEL COMP 4340 AND STEEL COMP E4340 |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES NUT THREAD |
| CQJX |
NOMINAL THREAD SIZE |
0.312 INCHES STUD THREAD |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
STUD,LOCKED IN |
| CSYM |
III SURFACE FINISH |
125.0 MICROINCHES OVERALL |
| AAUM |
LOCKING FEATURE |
RING, LOCK KEYED |
| AAVK |
SHOULDER LENGTH |
0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
0.935 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF NUT THREAD |
| STYL |
STYLE DESIGNATOR |
LOCKED IN |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| AAJD |
THREAD CLASS |
3A NUT THREAD |
| AAJD |
THREAD CLASS |
3A STUD THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND STUD THREAD |
| AASA |
THREAD LENGTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM NUT THREAD |
| AASA |
THREAD LENGTH |
0.330 INCHES NOMINAL STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
18 STUD THREAD |
| CMLP |
THREAD QUANTITY PER INCH |
28 NUT THREAD |
| THSD |
THREAD SERIES DESIGNATOR |
UNC STUD THREAD |
