| MRC |
Requirement Statement |
Characteristics |
| ADCX |
DISTANCE FROM SERRATED PORTION TO END OF STUD THREAD |
0.127 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| ADCT |
DISTANCE FROM SERRATED PORTION TO NUT END |
0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| ADCU |
DISTANCE FROM SERRATED PORTION TO STUD END |
0.653 INCHES MINIMUM AND 0.693 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
277.0 BRINELL HULTGREN NOMINAL |
| MATT |
MATERIAL |
IRON ALLOY 660 |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES NUT THREAD A |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES NUT THREAD B |
| AAUM |
LOCKING FEATURE |
RING, LOCK SERRATED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5734 ASSN STD SINGLE MATERIAL RESPONSE |
| CWKL |
SERRATION INCLUDED ANGLE |
85.0 DEGREES MINIMUM AND 88.0 DEGREES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.423 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF NUT THREAD A |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF NUT THREAD B |
| STYL |
STYLE DESIGNATOR |
LOCKED IN |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES NUT THD |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES SHANK |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| AAJD |
THREAD CLASS |
3A NUT THREAD A |
| AAJD |
THREAD CLASS |
3A NUT THREAD B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND NUT THREAD B |
| AASA |
THREAD LENGTH |
0.511 INCHES MINIMUM NUT THREAD B AND 0.551 INCHES MAXIMUM NUT THREAD B |
| AASA |
THREAD LENGTH |
0.579 INCHES MINIMUM NUT THREAD A AND 0.609 INCHES MAXIMUM NUT THREAD A |
| CMLP |
THREAD QUANTITY PER INCH |
16 NUT THREAD B |
| CMLP |
THREAD QUANTITY PER INCH |
28 NUT THREAD A |
