| MRC |
Requirement Statement |
Characteristics |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.344 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/10 FED SPEC 1ST MATERIAL RESPONSE LOCKING INSERT OR AMS 7245 ASSN STD 2ND MATERIAL RESPONSE LOCKING INSERT |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 NUT |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6066 LOCKING INSERT OR STEEL CORROSION RESISTING LOCKING INSERT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ADEA |
NUT HEIGHT |
2.218 INCHES MINIMUM AND 2.222 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
0.975 INCHES MINIMUM AND 0.995 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH METALLIC INSERT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-A-12545 MIL SPEC SINGLE MATERIAL RESPONSE NUT |
| ADEB |
PLATE THICKNESS |
0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.386 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNF |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81205-BACN10MS MANUFACTURERS STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE LOCKING INSERT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| SFTT |
SURFACE TREATMENT |
ANODIZE LOCKING INSERT |
| SFTT |
SURFACE TREATMENT |
ANODIZE NUT |
| AAJD |
THREAD CLASS |
2B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
