| MRC |
Requirement Statement |
Characteristics |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-6855,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/13,TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE BASE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/13,TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE SHELL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 BASE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 SHELL |
| MATT |
MATERIAL |
STEEL CAP |
| MATT |
MATERIAL |
RUBBER SYNTHETIC SEAL |
| MATT |
MATERIAL |
STEEL COMP 4130 NUT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| ADEA |
NUT HEIGHT |
0.929 INCHES NOMINAL |
| ACVN |
NUT LENGTH |
1.406 INCHES NOMINAL |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI ASSN STD SINGLE MATERIAL RESPONSE NUT |
| ADEB |
PLATE THICKNESS |
0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.860 INCHES NOMINAL |
| BZRR |
THREAD SERIES |
UNF |
| SFTT |
SURFACE TREATMENT |
ANODIZE BASE |
| SFTT |
SURFACE TREATMENT |
ANODIZE SHELL |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
