| MRC |
Requirement Statement |
Characteristics |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| ZZZW |
DEPARTURE FROM CITED DOCUMENT |
AS MODIFIED BY MATERIAL |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| MATT |
MATERIAL |
STEEL COMP 1212 NUT |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFR |
MOUNTING PROVISION LOCATION |
OPPOSITE NUT PROJECTION SIDE |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
250 DEG F TYPE |
| ADEA |
NUT HEIGHT |
0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5010 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4037 ASSN STD SINGLE MATERIAL RESPONSE BASE |
| ADEB |
PLATE THICKNESS |
0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BASE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SFTT |
SURFACE TREATMENT |
ANODIZE BASE |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
