| MRC |
Requirement Statement |
Characteristics |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
W/S: HELICOPTER, CHINOOK, CH-47 TRAINER, B-1B AIRCRAFT AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130) AIRCRAFT, AIRLIFTER C-17A AIRCRAFT MH-47E SPECIAL OPERATIONS AIRCRAFT AIRCRAFT, AWACS, E-3A AIRCRAFT, STRATOFORTRESS B-52 JOINT STARS TARGET RADAR |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-A-25493 MIL SPEC 2ND MATERIAL RESPONSE LOCKING INSERT OR MIL-A-12545 TEMPER T6 MIL SPEC 2ND MATERIAL RESPONSE LOCKING INSERT |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6066 LOCKING INSERT OR ALUMINUM ALLOY 6061 LOCKING INSERT |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING OVERALL EXCEPT INSERT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ADEA |
NUT HEIGHT |
0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
0.975 INCHES MINIMUM AND 0.995 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH METALLIC INSERT |
| ADEB |
PLATE THICKNESS |
0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.386 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CHROMATE OVERALL |
| AAJD |
THREAD CLASS |
2B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
