| MRC |
Requirement Statement |
Characteristics |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 321 BASE |
| MATT |
MATERIAL |
STEEL COMP 347 NUT OR STEEL UNS S34720 NUT OR STEEL UNS S34723 NUT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| ADEA |
NUT HEIGHT |
0.396 INCHES MINIMUM AND 0.411 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI FED SPEC ALL MATERIAL RESPONSES NUT OR AMS 5642 ASSN STD 2ND MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BASE |
| ADEB |
PLATE THICKNESS |
0.029 INCHES MINIMUM AND 0.039 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| BZRR |
THREAD SERIES |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2410 ASSN STD 1ST TREATMENT RESPONSE BASE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE NUT |
| SFTT |
SURFACE TREATMENT |
SILVER NUT |
| SFTT |
SURFACE TREATMENT |
SILVER BASE OR PASSIVATE BASE |
| AZKQ |
TEMP RATING |
1200.0 DEG FAHRENHEIT NOMINAL |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
