| MRC |
Requirement Statement |
Characteristics |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MAXIMUM |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING INSERT |
| MATT |
MATERIAL |
STEEL NUT |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFR |
MOUNTING PROVISION LOCATION |
OPPOSITE NUT PROJECTION SIDE |
| CQJX |
NOMINAL THREAD SIZE |
0.312 INCHES |
| ADEA |
NUT HEIGHT |
0.283 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
1.296 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ADEB |
PLATE THICKNESS |
0.075 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.484 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNJF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
