| MRC |
Requirement Statement |
Characteristics |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| CQFM |
HARDNESS RATING |
60.0 SHORE DUROMETER A NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-6855 CLASS 1 GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MATT |
MATERIAL |
RUBBER SYNTHETIC SEAL |
| MATT |
MATERIAL |
STEEL NUT |
| MATT |
MATERIAL |
STEEL SHELL |
| MATT |
MATERIAL |
STEEL WASHER OR ALUMINUM ALLOY WASHER |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CQJX |
NOMINAL THREAD SIZE |
0.164 INCHES |
| ADEA |
NUT HEIGHT |
0.313 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
0.989 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |
| ABAJ |
LUBRICATION |
DRY FILM LUBRICANT |
| ADEB |
PLATE THICKNESS |
0.030 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.568 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.640 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNJC |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1473 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 TYPE 1 MIL SPEC 1ST TREATMENT RESPONSE WASHER OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE WASHER OR QQ-P-416 FED SPEC 3RD TREATMENT RESPONSE WASHER |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE2,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| AZKQ |
TEMP RATING |
-65.0 DEG FAHRENHEIT MINIMUM AND 225.0 DEG FAHRENHEIT MAXIMUM |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
