| MRC |
Requirement Statement |
Characteristics |
| ADBR |
DISTANCE FROM BASE TO CENTER OF APERTURE |
0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| ADFV |
DISTANCE FROM MOUNTING HOLE CENTER TO BASE |
0.215 INCHES MINIMUM AND 0.245 INCHES MAXIMUM |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.138 INCHES MINIMUM AND 0.142 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING INSERT |
| MATT |
MATERIAL |
STEEL COMP 1010 SHELL |
| MATT |
MATERIAL |
STEEL COMP 1212 NUT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.066 NOMINAL MILS AND 0.069 NOMINAL CENTIMETERS |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CQJX |
NOMINAL THREAD SIZE |
0.112 INCHES |
| ADEA |
NUT HEIGHT |
0.136 NOMINAL MILS AND 0.166 NOMINAL CENTIMETERS |
| ACVN |
NUT LENGTH |
0.471 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI ASSN STD SINGLE MATERIAL RESPONSE SHELL |
| ADEB |
PLATE THICKNESS |
0.010 NOMINAL MILS AND 0.040 NOMINAL CENTIMETERS |
| ADEC |
PLATE WIDTH |
0.251 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNC |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE2,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE2,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SHELL |
| AZKQ |
TEMP RATING |
120.0 DEG CELSIUS NOMINAL |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
40 |
