| MRC |
Requirement Statement |
Characteristics |
| AGGP |
DRILLED HOLE DIAMETER |
0.063 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
B-2 BOMBER |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
CONFIGURATION F |
| ALET |
HOLE TYPE AND QUANTITY |
2 DRILLED |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 OVERALL EXCEPT INSERT |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING LOCKING INSERT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.148 INCHES NOMINAL |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ADEA |
NUT HEIGHT |
1.780 INCHES MINIMUM AND 1.820 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
0.975 INCHES MINIMUM AND 0.995 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |
| ABAJ |
LUBRICATION |
DRY FILM LUBRICANT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-A-12545 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT |
| ADEB |
PLATE THICKNESS |
0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.386 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
NUT, STAND-OFF, RIGHT ANGLE, TWO LUG |
| BZRR |
THREAD SERIES |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL EXCEPT INSERT |
| AAJD |
THREAD CLASS |
2B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
