| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| ABNZ |
EFFECTIVE LENGTH |
0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM |
| ABMZ |
DIAMETER |
0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| AMCS |
FIRST END TAPER LENGTH |
0.020 INCHES NOMINAL |
| ABRC |
FIRST HOLE DIAMETER |
0.09375 INCHES MINIMUM AND 0.09775 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.360 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLAT |
| HGTH |
HEIGHT |
0.062 INCHES NOMINAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| MATT |
MATERIAL |
STEEL OVERALL |
| CRRG |
PIN HEAD DIAMETER |
0.438 INCHES NOMINAL |
| ABPB |
UNDER HEAD LENGTH |
0.703 INCHES MINIMUM AND 0.733 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.305 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES OUTSIDE DIAMETER |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE OVERALL |
