| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.101 INCHES NOMINAL |
| ABNZ |
EFFECTIVE LENGTH |
0.567 INCHES NOMINAL |
| ABMZ |
DIAMETER |
0.1903 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| AMCS |
FIRST END TAPER LENGTH |
0.020 INCHES NOMINAL |
| ABRC |
FIRST HOLE DIAMETER |
0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.603 INCHES MINIMUM AND 0.613 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
44.0 ROCKWELL C MINIMUM OVERALL AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT FILLISTER |
| HGTH |
HEIGHT |
0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP E52100 OVERALL |
| CRRG |
PIN HEAD DIAMETER |
0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| ABPB |
UNDER HEAD LENGTH |
0.699 INCHES MINIMUM AND 0.719 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.025 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES LONG SHANK |
