| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.144 INCHES NOMINAL |
| AASY |
DISTANCE FROM CENTERLINE TO FLAT |
0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| ABMZ |
DIAMETER |
0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.078 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
15.0 DEGREES NOMINAL |
| ABRC |
FIRST HOLE DIAMETER |
0.106 INCHES NOMINAL |
| AASK |
HEAD STYLE |
DEE |
| HGTH |
HEIGHT |
0.062 INCHES NOMINAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| MATT |
MATERIAL |
STEEL COMP 630 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CRRG |
PIN HEAD DIAMETER |
0.437 INCHES NOMINAL |
| ABPB |
UNDER HEAD LENGTH |
2.032 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.280 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.050 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES OVERALL |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES OUTSIDE DIAMETER |
