| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.774 INCHES MINIMUM AND 0.804 INCHES MAXIMUM |
| ABNZ |
EFFECTIVE LENGTH |
1.2585 INCHES MINIMUM AND 1.2730 INCHES MAXIMUM |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
ABMZ |
| ABMZ |
DIAMETER |
0.3140 INCHES MINIMUM AND 0.3145 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| ABRC |
FIRST HOLE DIAMETER |
0.094 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
43.0 ROCKWELL C MINIMUM OVERALL AND 48.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| HGTH |
HEIGHT |
0.120 INCHES MINIMUM AND 0.123 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4340 OVERALL |
| ABRD |
SECOND HOLE DIAMETER |
0.094 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| CRRG |
PIN HEAD DIAMETER |
0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| ABPB |
UNDER HEAD LENGTH |
2.847 INCHES MINIMUM AND 2.860 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-1623 TY M CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE MANGANESE OVERALL |
