| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.208 INCHES NOMINAL |
| ABMZ |
DIAMETER |
0.373 INCHES NOMINAL |
| AMCS |
FIRST END TAPER LENGTH |
0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
10.0 DEGREES MINIMUM AND 18.0 DEGREES MAXIMUM |
| ABRC |
FIRST HOLE DIAMETER |
0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.565 INCHES MINIMUM AND 0.575 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| HGTH |
HEIGHT |
0.062 INCHES NOMINAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| MATT |
MATERIAL |
STEEL COMP 3140 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| CRRG |
PIN HEAD DIAMETER |
0.375 INCHES NOMINAL |
| ABPB |
UNDER HEAD LENGTH |
1.308 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.185 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| ABPE |
UNDERCUT RADIUS |
0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
