| MRC |
Requirement Statement |
Characteristics |
| ABNZ |
EFFECTIVE LENGTH |
1.128 INCHES NOMINAL |
| ABMZ |
DIAMETER |
0.3825 INCHES MINIMUM AND 0.8230 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| AMCS |
FIRST END TAPER LENGTH |
0.020 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM OVERALL AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT |
| HGTH |
HEIGHT |
0.047 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| ABPF |
SECOND UNDERCUT DIAMETER |
0.3795 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM |
| ABPD |
SECOND UNDERCUT WIDTH |
0.060 INCHES NOMINAL |
| CRRG |
PIN HEAD DIAMETER |
0.500 INCHES NOMINAL |
| ABPB |
UNDER HEAD LENGTH |
1.218 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.350 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| CSYM |
SURFACE FINISH |
13.0 MICROINCHES OUTSIDE DIAMETER |
