| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.500 INCHES NOMINAL |
| ABNZ |
EFFECTIVE LENGTH |
1.720 INCHES MINIMUM AND 1.740 INCHES MAXIMUM |
| ABMZ |
DIAMETER |
0.5601 INCHES MINIMUM AND 0.5606 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.360 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
30.0 DEGREES NOMINAL |
| ANEE |
GRIP LENGTH |
1.790 INCHES MINIMUM AND 1.810 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT |
| HGTH |
HEIGHT |
0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 416 OVERALL |
| CRRG |
PIN HEAD DIAMETER |
0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM |
| ABPB |
UNDER HEAD LENGTH |
2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.5501 INCHES MINIMUM AND 0.5506 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES OVERALL |
