| MRC |
Requirement Statement |
Characteristics |
| ABMZ |
DIAMETER |
0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.188 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
10.0 DEGREES NOMINAL |
| AASK |
HEAD STYLE |
FLAT |
| HGTH |
HEIGHT |
0.040 INCHES MINIMUM AND 0.045 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-890 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| CRRG |
PIN HEAD DIAMETER |
0.305 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| ABPB |
UNDER HEAD LENGTH |
1.205 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.0469 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES HEAD BEARING SURFACE |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES HEAD OUTSIDE DIAMETER |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES HEAD TOP |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES LONG SHANK |
| SFTT |
SURFACE TREATMENT |
OXIDE OVERALL |
