| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.633 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
LSWE THIRD DECK HATCH LATCH |
| ABRF |
CENTER TO CENTER DISTANCE BETWEEN HOLES |
1.000 INCHES NOMINAL |
| AAZP |
CHAMFER LENGTH |
0.060 INCHES NOMINAL |
| ABMZ |
DIAMETER |
0.494 INCHES MINIMUM AND 0.496 INCHES MAXIMUM |
| ABRC |
FIRST HOLE DIAMETER |
0.141 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLAT |
| HGTH |
HEIGHT |
0.250 INCHES NOMINAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
BOTH END DRILLED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763E, COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 304 OVERALL |
| ABRD |
SECOND HOLE DIAMETER |
0.130 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
PIN,LATCH LINK |
| CRRG |
PIN HEAD DIAMETER |
1.000 INCHES NOMINAL |
| CQPJ |
PIN CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| FEAT |
SPECIAL FEATURES |
LUBRICATION HOLE .13 OD X 1.34 DP GREASE GROOVE ONE INCH DOWN FROM TOP OF PIN, .06 R X .06 DP |
| ABPB |
UNDER HEAD LENGTH |
2.633 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
STRAIGHT |
