| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.380 INCHES NOMINAL |
| ABNZ |
EFFECTIVE LENGTH |
2.370 INCHES NOMINAL |
| ABMZ |
DIAMETER |
0.812 INCHES MINIMUM AND 0.814 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.060 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| ABRC |
FIRST HOLE DIAMETER |
0.141 INCHES NOMINAL |
| AASK |
HEAD STYLE |
HEXAGON |
| HGTH |
HEIGHT |
0.630 INCHES NOMINAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763, COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 316 OVERALL |
| FEAT |
SPECIAL FEATURES |
7HEAD DRILLED FOR LUBE FITTING .250-28UNF-2B X.19 DP LUBE HOLE .13 IN DIA X 2.00 IN DP LUBE GROOVE 1.13 FROM HEAD RADIUS .06 X .06 DP, HOLE DRILLED IN GROOVE FOR LUBE HOLE FROM HEAD, .13 IN DIA THROUGH PIN END THREADED PAST GROOVE, .750-16UNF-2A |
| ABPB |
UNDER HEAD LENGTH |
3.250 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.688 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.125 INCHES NOMINAL |
| ASDB |
WIDTH ACROSS FLATS |
1.130 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
GROOVE |
