| MRC |
Requirement Statement |
Characteristics |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.313 INCHES NOMINAL |
| ABNZ |
EFFECTIVE LENGTH |
2.050 INCHES NOMINAL |
| ABMZ |
DIAMETER |
0.625 INCHES MINIMUM AND 0.626 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.030 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| ABRC |
FIRST HOLE DIAMETER |
0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| HGTH |
HEIGHT |
0.250 INCHES NOMINAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| MATT |
MATERIAL |
STEEL COMP 4340 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ABPF |
SECOND UNDERCUT DIAMETER |
0.500 INCHES NOMINAL |
| ABPD |
SECOND UNDERCUT WIDTH |
0.125 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
CLEVIS PIN |
| CRRG |
PIN HEAD DIAMETER |
1.000 INCHES NOMINAL |
| ABPB |
UNDER HEAD LENGTH |
2.250 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.585 INCHES MINIMUM AND 0.591 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.040 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
