| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 77D617068P1 | LOCKHEED MARTIN CORPORATION | 3538 | 3 | 2 | 5 | ||||
| 77D617068P001 | LOCKHEED MARTIN CORPORATION | Z0CF4 | 5 | 2 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.740 INCHES NOMINAL |
| AAZP | CHAMFER LENGTH | 0.380 INCHES NOMINAL |
| ABMZ | DIAMETER | 1.240 INCHES MINIMUM AND 1.245 INCHES MAXIMUM |
| ABRC | FIRST HOLE DIAMETER | 0.470 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT |
| HGTH | HEIGHT | 0.500 INCHES NOMINAL |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,STAYBRACE |
| CRRG | PIN HEAD DIAMETER | 1.750 INCHES NOMINAL |
| CQPJ | PIN CHAMFER ANGLE | 30.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | FINISH ANODIZE IN ACCORDANCE WITH MIL-A-8625 TYPE III CLASS 2, 002 THICK,COLOR BLACK EXCEPT THAT THE TYPE III COATING IS TO PASS THE CORROSION TEST OF PARAGRAPH 4.5.3 AFTER 15.000 HOURS OF EXPOSURE COATING TO CONTAIN LOW FRICTION FILLERS AND SEALER DIMENS |
| ABPB | UNDER HEAD LENGTH | 13.000 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | STRAIGHT |
