| MRC |
Requirement Statement |
Characteristics |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
1.756 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
1.469 INCHES MINIMUM AND 1.532 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM SLEEVE AND 40.0 ROCKWELL C MAXIMUM SLEEVE |
| AASU |
HEAD HEIGHT |
0.131 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.480 INCHES MINIMUM AND 0.522 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
UNDERCUT PAN NO. 2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM OR ASTM A547 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MATT |
MATERIAL |
STEEL COMP 4037 SLEEVE OR STEEL COMP 4027 SLEEVE OR STEEL COMP 4130 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 8740 STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A547 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR 66 FED STD 2ND MATERIAL RESPONSE SLEEVE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE SLEEVE OR 66 FED STD 3RD MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
8500 SINGLE POUNDS PER SQUARE INCH |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE AND CHROMATE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
