| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
DRIVE STEM-TYPE H |
| AASB |
FASTENER LENGTH |
0.459 INCHES MINIMUM AND 0.499 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.297 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
95.0 ROCKWELL B MAXIMUM BODY |
| AAZG |
HEAD MAJOR DIAMETER |
0.472 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
STEEL COMP 1006 BODY OR STEEL COMP 1008 BODY OR STEEL COMP 1009 BODY OR STEEL COMP 1010 BODY OR STEEL COMP 1011 BODY OR STEEL COMP 1012 BODY OR STEEL COMP 1013 BODY OR STEEL COMP 1015 BODY OR STEEL COMP 1016 BODY OR STEEL COMP 1017 BODY OR STEEL COMP 1018 |
| MATT |
MATERIAL |
STEEL COMP 301 STEM OR STEEL COMP 302B STEM OR STEEL COMP 302 STEM OR STEEL COMP 303 STEM OR STEEL COMP 303SE STEM OR STEEL COMP 304 STEM OR STEEL COMP 304L STEM OR STEEL COMP 305 STEM OR STEEL COMP 308 STEM OR STEEL COMP 309 STEM OR STEEL COMP 309S STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
G66 FED STD ALL MATERIAL RESPONSES BODY |
| AAZE |
SHANK DIAMETER |
0.246 INCHES MINIMUM AND 0.252 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
DRIVE PIN |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY AND CHROMATE BODY |
| SFTT |
SURFACE TREATMENT |
PASSIVATE STEM |
