| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| ST3M758D6-6 | SPS TECHNOLOGIES LLC | 6725 | 3 | 2 | 2 | ||||
| ST3M758D6-6 | SPS TECHNOLOGIES LLC | 6950 | 3 | 2 | 2 | ||||
| ST3M758D6-6 | SPS TECHNOLOGIES LLC | 17446 | 3 | 2 | 2 | ||||
| ST3M758D6-6 | SPS TECHNOLOGIES LLC | 56878 | 3 | 2 | 2 | ||||
| ST3M758D6-6 | SPS TECHNOLOGIES LLC | 60516 | 3 | 2 | 2 | ||||
| ST3M758D6-6 | SPS TECHNOLOGIES LLC | 73197 | 3 | 2 | 2 | ||||
| ST3M758D6-6 | SPS TECHNOLOGIES LLC | L4528 | 3 | 2 | 2 | ||||
| HL645LL12-6 | SPS TECHNOLOGIES LLC | 50392 | C | 1 | 2 | AF | |||
| ST3M758D6-6 | SPS TECHNOLOGIES LLC | 76301 | 7 | 2 | 2 | ||||
| ST3M456C6-6 | SPS TECHNOLOGIES LLC | 76301 | 5 | 9 | 2 | ||||
| HL645LL12-6 | SPS TECHNOLOGIES LLC | 73197 | 5 | 9 | 2 | ||||
| AIC-L-645-12-6 | SPS TECHNOLOGIES LLC | 6725 | 5 | 9 | 2 | ||||
| ST3M456C6-6 | SPS TECHNOLOGIES LLC | 6725 | 5 | 9 | 2 | ||||
| HL645LL12-6 | SPS TECHNOLOGIES LLC | 17446 | 5 | 9 | 2 | ||||
| ST3M456C6-6 | SPS TECHNOLOGIES LLC | 17446 | 5 | 9 | 2 | ||||
| HL645LL12-6 | SPS TECHNOLOGIES LLC | 56878 | 5 | 9 | 2 | ||||
| HL645YE-12-6 | SPS TECHNOLOGIES LLC | 56878 | 5 | 9 | 2 | ||||
| ST3M456C6-6 | SPS TECHNOLOGIES LLC | 56878 | 5 | 9 | 2 | ||||
| MA4456-6-6 | SPS TECHNOLOGIES LLC | 58845 | 5 | 9 | 2 | ||||
| ST3M456C6-6 | SPS TECHNOLOGIES LLC | 58845 | 5 | 9 | 2 | ||||
| HL645LL12-6 | SPS TECHNOLOGIES LLC | 60516 | 5 | 9 | 2 | ||||
| HL645YE-12-6 | SPS TECHNOLOGIES LLC | 60516 | 5 | 9 | 2 | ||||
| ST3M456C6-6 | SPS TECHNOLOGIES LLC | 60516 | 5 | 9 | 2 | ||||
| HL645YE-12-6 | SPS TECHNOLOGIES LLC | 73197 | 5 | 9 | 2 | ||||
| ST3M456C6-6 | SPS TECHNOLOGIES LLC | 73197 | 5 | 9 | 2 | ||||
| HL645LL12-6 | SPS TECHNOLOGIES LLC | 92215 | 5 | 9 | 2 | ||||
| HL645YE-12-6 | SPS TECHNOLOGIES LLC | 92215 | 5 | 9 | 2 | ||||
| ST3M456C6-6 | SPS TECHNOLOGIES LLC | 92215 | 5 | 9 | 2 | ||||
| HL645YE-12-6 | SPS TECHNOLOGIES LLC | 97928 | 5 | 9 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AASB | FASTENER LENGTH | 0.910 INCHES MINIMUM AND 0.930 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.380 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.555 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| ABAJ | LUBRICATION | CETYL ALCOHOL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE | SHANK DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| CQSX | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH |
| FEAT | SPECIAL FEATURES | WHITE PAINT ON HEAD |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATB | WIDTH BETWEEN FLATS | 0.158 INCHES MINIMUM AND 0.162 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 2S8 CAGEC 73187 MFR REF 1ST TREATMENT RESPONSE OVERALL OR QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 24 |
