| MRC |
Requirement Statement |
Characteristics |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
1.616 INCHES MINIMUM AND 1.646 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.344 INCHES MINIMUM AND 1.407 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM BODY AND 40.0 ROCKWELL C MAXIMUM BODY |
| AASU |
HEAD HEIGHT |
0.131 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.480 INCHES MINIMUM AND 0.522 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
UNDERCUT PAN NO. 2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-405 FED SPEC 1ST MATERIAL RESPONSE BOLT OR QQ-W-405 FED SPEC 2ND MATERIAL RESPONSE BOLT OR QQ-W-405 FED SPEC 3RD MATERIAL RESPONSE BOLT |
| MATT |
MATERIAL |
STEEL COMP 4027 BOLT OR STEEL COMP 4037 BOLT OR STEEL COMP 4130 BOLT |
| MATT |
MATERIAL |
STEEL COMP 4130 NUT |
| MATT |
MATERIAL |
STEEL COMP 8740 SLEEVE |
| AAZE |
SHANK DIAMETER |
0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| CQSX |
SHEAR STRENGTH |
8500 SINGLE POUNDS PER SQUARE INCH |
| AAZF |
|
|
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
