| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| BACB30MD6-10 | SPS TECHNOLOGIES LLC | 6725 | 3 | 2 | 2 | ||||
| HL220-6-10 | SPS TECHNOLOGIES LLC | C4293 | 5 | 2 | 2 | ||||
| HL220-6-10 | SPS TECHNOLOGIES LLC | 6725 | 5 | 2 | 2 | ||||
| HL220-6-10 | SPS TECHNOLOGIES LLC | 5M902 | 5 | 2 | 2 | ||||
| HL220-6-10 | SPS TECHNOLOGIES LLC | K0058 | 5 | 2 | 2 | ||||
| BACB30MD6-10 | SPS TECHNOLOGIES LLC | 6950 | 5 | 2 | 2 | ||||
| BACB30MD6-10 | SPS TECHNOLOGIES LLC | 1RC86 | 5 | 2 | 2 | ||||
| BACB30MD6-10 | SPS TECHNOLOGIES LLC | 56878 | 5 | 2 | 2 | ||||
| BACB30MD6-10 | SPS TECHNOLOGIES LLC | 60516 | 5 | 2 | 2 | ||||
| BACB30MD6-10 | SPS TECHNOLOGIES LLC | 73197 | 5 | 2 | 2 | ||||
| HL220-6-10 | SPS TECHNOLOGIES LLC | R1120 | 5 | 2 | 2 | ||||
| BACB30MD6-10 | SPS TECHNOLOGIES LLC | 81205 | 7 | 2 | 2 | ||||
| HL220-6-10 | SPS TECHNOLOGIES LLC | 17446 | 5 | 9 | 2 | ||||
| HL220-6-10 | SPS TECHNOLOGIES LLC | 56878 | 5 | 9 | 2 | ||||
| HL220-6-10 | SPS TECHNOLOGIES LLC | 60516 | 5 | 9 | 2 | ||||
| HL220-6-10 | SPS TECHNOLOGIES LLC | 73197 | 5 | 9 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| AASB | FASTENER LENGTH | 0.940 INCHES MINIMUM AND 0.960 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AASK | HEAD STYLE | ERR-090 |
| MATT | MATERIAL | STEEL OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| AAZE | SHANK DIAMETER | 0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATB | WIDTH BETWEEN FLATS | 0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
