| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.420 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.251 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM BOLT AND 45.0 ROCKWELL C MAXIMUM BOLT |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM NUT AND 45.0 ROCKWELL C MAXIMUM NUT |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM SLEEVE AND 45.0 ROCKWELL C MAXIMUM SLEEVE |
| AAZG |
HEAD MAJOR DIAMETER |
0.225 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
IRON ALLOY 660 BOLT |
| MATT |
MATERIAL |
IRON ALLOY 660 NUT |
| MATT |
MATERIAL |
IRON ALLOY 660 SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5732 ASSN STD SINGLE MATERIAL RESPONSE BOLT OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5732 ASSN STD SINGLE MATERIAL RESPONSE NUT OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5732 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.125 INCHES NOMINAL |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE BOLT |
| SFTT |
SURFACE TREATMENT |
PASSIVATE NUT |
| SFTT |
SURFACE TREATMENT |
PASSIVATE SLEEVE |
