| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.523 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.094 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
326.0 KNOOP MINIMUM SLEEVE AND 466.0 KNOOP MAXIMUM SLEEVE |
| AAZG |
HEAD MAJOR DIAMETER |
0.507 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-W-405 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-W-405 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| MATT |
MATERIAL |
IRON ALLOY 660 MECHANICAL LOCK |
| MATT |
MATERIAL |
STEEL COMP 4130 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 8740 STEM |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5737 NATIONAL SPEC SINGLE MATERIAL RESPONSE MECHANICAL LOCK |
| AAZE |
SHANK DIAMETER |
0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
5900 SINGLE POUNDS PER SQUARE INCH |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-F-81177 GOVERNMENT SPECIFICATION |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM MECHANICAL LOCK |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
