| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.963 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.469 INCHES MINIMUM AND 0.532 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM BODY AND 40.0 ROCKWELL C MAXIMUM BODY |
| AAZG |
HEAD MAJOR DIAMETER |
0.634 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM OR QQ-W-405 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-W-405 FED SPEC 1ST MATERIAL RESPONSE BODY OR QQ-W-405 FED SPEC 2ND MATERIAL RESPONSE BODY OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE BODY |
| MATT |
MATERIAL |
STEEL COMP 1144 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4037 BODY OR STEEL COMP 4130 BODY |
| MATT |
MATERIAL |
STEEL COMP 8740 STEM |
| AAZE |
SHANK DIAMETER |
0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
8500 SINGLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
MECHANICAL LOCK STEEL AISI 660 MECHANICAL LOCK STEEL,QQ-S-633 COMP C1144 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL3 FED SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1 OR 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM MECHANICAL LOCK |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
