| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 100-047-6-16 | BELL HELICOPTER TEXTRON INC. | 97499 | 3 | 2 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | 73197 | 5 | 2 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | L4528 | 5 | 2 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | 6725 | 5 | 2 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | 6950 | 5 | 2 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | 17446 | 5 | 2 | 2 | ||||
| 100-047-6-16 | BELL HELICOPTER TEXTRON INC. | 56878 | 5 | 2 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | 60516 | 5 | 2 | 2 | ||||
| 100-047-6-16 | BELL HELICOPTER TEXTRON INC. | 73197 | 5 | 2 | 2 | ||||
| 100-047-6-16 | BELL HELICOPTER TEXTRON INC. | L4528 | 5 | 2 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | 97499 | 7 | 2 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | 56878 | 3 | 9 | 2 | ||||
| HL21-6-16 | BELL HELICOPTER TEXTRON INC. | 73197 | 5 | 9 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | 0PTK6 | 5 | 9 | 2 | ||||
| HL21-6-16 | BELL HELICOPTER TEXTRON INC. | 17446 | 5 | 9 | 2 | ||||
| HL21-6-16 | BELL HELICOPTER TEXTRON INC. | 56878 | 5 | 9 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | 92215 | 5 | 9 | 2 | ||||
| HL21-6-16 | BELL HELICOPTER TEXTRON INC. | 92215 | 5 | 9 | 2 | ||||
| HL21-6-16 | BELL HELICOPTER TEXTRON INC. | 97928 | 5 | 9 | 2 | ||||
| HL21PB6-16 | BELL HELICOPTER TEXTRON INC. | 97928 | 5 | 9 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AASB | FASTENER LENGTH | 1.315 INCHES MINIMUM AND 1.335 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.005 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.377 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4130 OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| AAZE | SHANK DIAMETER | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATB | WIDTH BETWEEN FLATS | 0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
