| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| AF5191-3-2 | ALLFAST FASTENING SYSTEMS, LLC | 53551 | 3 | 2 | 2 | ||||
| MS20605M3W2 | ALLFAST FASTENING SYSTEMS, LLC | 80205 | 3 | 2 | 2 | ||||
| NASM20605 | ALLFAST FASTENING SYSTEMS, LLC | 80205 | 5 | 1 | 2 | ||||
| RV591-3-2 | ALLFAST FASTENING SYSTEMS, LLC | 53551 | 5 | 9 | 2 | ||||
| RV591-3-2 | ALLFAST FASTENING SYSTEMS, LLC | 98996 | 5 | 9 | 2 | ||||
| MS20605M3W2 | ALLFAST FASTENING SYSTEMS, LLC | 96906 | 5 | 9 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| AASB | FASTENER LENGTH | 0.203 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.179 INCHES NOMINAL |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | NICKEL ALLOY 400 OVERALL |
| AAZE | SHANK DIAMETER | 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PULL THROUGH HOLLOW SHANK |
| CQSX | SHEAR STRENGTH | 70 SINGLE POUNDS PER SQUARE INCH |
| SFTT | SURFACE TREATMENT | ANY ACCEPTABLE OVERALL |
