| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
1.204 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.470 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM NUT AND 53.0 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.342 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
NICKEL ALLOY X-750 SLEEVE OR IRON ALLOY 660 SLEEVE |
| MATT |
MATERIAL |
STEEL NUT |
| CQBC |
MINIMUM TENSILE STRENGTH |
2100 POUNDS PER SQUARE INCH |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL AND CARBO WAX AND DRY FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5667 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE OR AMS 5713 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| AAZE |
SHANK DIAMETER |
0.228 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
BLIND RIVET, NUT AND BOLT (ASSEMBLY) |
| CQSX |
SHEAR STRENGTH |
6900 DOUBLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
FASTENER LENGTH INCLUDES BREAKABLE STEM |
