| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| HLT51TB-6-3 | HUCK INTERNATIONAL, INC. | 17446 | 3 | 2 | 5 | ||||
| HLT51YC-6-3 | HUCK INTERNATIONAL, INC. | 17446 | 3 | 2 | 5 | ||||
| HLT62YB-6-3 | HUCK INTERNATIONAL, INC. | 17446 | 3 | 2 | 5 | ||||
| ST3M758C3-3 | HUCK INTERNATIONAL, INC. | 76301 | 3 | 2 | 5 | ||||
| HLT51TB-6-3 | HUCK INTERNATIONAL, INC. | 56878 | 5 | 2 | 5 | ||||
| HLT51YB-6-3 | HUCK INTERNATIONAL, INC. | 56878 | 5 | 2 | 5 | ||||
| HLT51YC-6-3 | HUCK INTERNATIONAL, INC. | 56878 | 5 | 2 | 5 | ||||
| HLT51TB-6-3 | HUCK INTERNATIONAL, INC. | 73197 | 5 | 2 | 5 | ||||
| HLT51YB-6-3 | HUCK INTERNATIONAL, INC. | 73197 | 5 | 2 | 5 | ||||
| HLT51YC-6-3 | HUCK INTERNATIONAL, INC. | 73197 | 5 | 2 | 5 | ||||
| HLT51TB-6-3 | HUCK INTERNATIONAL, INC. | 92215 | 5 | 2 | 5 | ||||
| HLT51YB-6-3 | HUCK INTERNATIONAL, INC. | 92215 | 5 | 2 | 5 | ||||
| HLT51YC-6-3 | HUCK INTERNATIONAL, INC. | 92215 | 5 | 2 | 5 | ||||
| HLT51TB-6-3 | HUCK INTERNATIONAL, INC. | L4528 | 5 | 2 | 5 | ||||
| HLT51YB-6-3 | HUCK INTERNATIONAL, INC. | L4528 | 5 | 2 | 5 | ||||
| HLT51YC-6-3 | HUCK INTERNATIONAL, INC. | L4528 | 5 | 2 | 5 | ||||
| ST3M758C3-3 | HUCK INTERNATIONAL, INC. | 6950 | 5 | 2 | 5 | ||||
| HP4758-3-3 | HUCK INTERNATIONAL, INC. | 0ZC92 | 5 | 2 | 5 | ||||
| HLT51YB-6-3 | HUCK INTERNATIONAL, INC. | K5673 | 5 | 2 | 5 | ||||
| HLT51YC-6-3 | HUCK INTERNATIONAL, INC. | K5673 | 5 | 2 | 5 | ||||
| HLT51YB6-3 | HUCK INTERNATIONAL, INC. | 6725 | 5 | 2 | 5 | ||||
| HLT51YC-6-3 | HUCK INTERNATIONAL, INC. | 6725 | 5 | 2 | 5 | ||||
| HLT51YC-6-3 | HUCK INTERNATIONAL, INC. | 60516 | 5 | 2 | 5 | ||||
| HLT51YB-6-3 | HUCK INTERNATIONAL, INC. | 60516 | 5 | 2 | 5 | ||||
| 3929AS1132-C3-3 | HUCK INTERNATIONAL, INC. | 30003 | 7 | 2 | 5 | ||||
| 10111413 | HUCK INTERNATIONAL, INC. | A486G | 6 | 9 | 5 | ||||
| AIC-L-758C3-3 | HUCK INTERNATIONAL, INC. | 6725 | 5 | 9 | 5 | ||||
| MA4758-3-3 | HUCK INTERNATIONAL, INC. | 58845 | 5 | 9 | 5 | ||||
| HLT51TB-6-3 | HUCK INTERNATIONAL, INC. | 97928 | 5 | 9 | 5 | ||||
| HLT51YB-6-3 | HUCK INTERNATIONAL, INC. | 97928 | 5 | 9 | 5 | ||||
| HLT51YC-6-3 | HUCK INTERNATIONAL, INC. | 97928 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AASB | FASTENER LENGTH | 0.508 INCHES MINIMUM AND 0.528 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.193 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWN COUTERSUNK GREATER THAN 135 DEGREES |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| ABAJ | LUBRICATION | SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE | SHANK DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| CQSX | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATB | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 32 |
