| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | 56878 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | 56878 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | 5M902 | 5 | 2 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | 5M902 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | 58998 | 5 | 2 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | 58998 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | 60516 | 5 | 2 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | 60516 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | 73197 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | 80539 | 5 | 2 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | 80539 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | 92215 | 5 | 2 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | 92215 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | K5673 | 5 | 2 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | K5673 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | L4528 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | 6725 | 5 | 2 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | 6725 | 5 | 2 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | 17446 | 5 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | 17446 | 5 | 2 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | 73197 | 3 | 2 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | L4528 | 3 | 2 | 5 | ||||
| ST3M760V3-3 | SPS TECHNOLOGIES, LLC | 76301 | 7 | 2 | 5 | ||||
| HLT313DL-6-3 | SPS TECHNOLOGIES, LLC | 97928 | 5 | 9 | 5 | ||||
| HLT313TB-6-3 | SPS TECHNOLOGIES, LLC | 97928 | 5 | 9 | 5 | ||||
| 10111883 | SPS TECHNOLOGIES, LLC | A486G | 6 | 9 | 5 | ||||
| AIC-L-760V3-3 | SPS TECHNOLOGIES, LLC | 6725 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AASB | FASTENER LENGTH | 0.503 INCHES MINIMUM AND 0.523 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.193 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.3813 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWN COUTERSUNK GREATER THAN 135 DEGREES |
| MATT | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| ABAJ | LUBRICATION | SOLID FILM OR DRY FILM AND CETYL ALCOHOL OR CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE | SHANK DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| CQSX | SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATB | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 32 |
