| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| HLT53YC-10-7 | HUCK INTERNATIONAL, INC. | 17446 | C | 1 | 5 | 9F | |||
| HLT53YB-10-7 | HUCK INTERNATIONAL, INC. | 17446 | C | 1 | 5 | 9F | |||
| HLT53TB10-7 | HUCK INTERNATIONAL, INC. | 73197 | C | 1 | 5 | AC | |||
| HP4760-5-7 | HUCK INTERNATIONAL, INC. | 0ZC92 | 3 | 2 | 5 | ||||
| HLT53YC-10-7 | HUCK INTERNATIONAL, INC. | 60516 | 5 | 2 | 5 | ||||
| HLT53YB-10-7 | HUCK INTERNATIONAL, INC. | 60516 | 5 | 2 | 5 | ||||
| HLT53YB-10-7 | HUCK INTERNATIONAL, INC. | K5673 | 5 | 2 | 5 | ||||
| HLT53YC-10-7 | HUCK INTERNATIONAL, INC. | K5673 | 5 | 2 | 5 | ||||
| AIC-L-760C5-7 | HUCK INTERNATIONAL, INC. | 6725 | 5 | 2 | 5 | ||||
| HLT53YB-10-7 | HUCK INTERNATIONAL, INC. | 56878 | 3 | 2 | 5 | ||||
| HLT53YC-10-7 | HUCK INTERNATIONAL, INC. | 56878 | 3 | 2 | 5 | ||||
| HLT53YB-10-7 | HUCK INTERNATIONAL, INC. | 73197 | 3 | 2 | 5 | ||||
| HLT53YC-10-7 | HUCK INTERNATIONAL, INC. | 73197 | 3 | 2 | 5 | ||||
| HLT53YB-10-7 | HUCK INTERNATIONAL, INC. | 92215 | 3 | 2 | 5 | ||||
| HLT53YC-10-7 | HUCK INTERNATIONAL, INC. | 92215 | 3 | 2 | 5 | ||||
| HLT53YB-10-7 | HUCK INTERNATIONAL, INC. | L4528 | 3 | 2 | 5 | ||||
| HLT53YC-10-7 | HUCK INTERNATIONAL, INC. | L4528 | 3 | 2 | 5 | ||||
| HLT53DL-10-7 | HUCK INTERNATIONAL, INC. | 73197 | 3 | 2 | 5 | ||||
| HLT53DL-10-7 | HUCK INTERNATIONAL, INC. | L4528 | 3 | 2 | 5 | ||||
| HLT53YC-10-7 | HUCK INTERNATIONAL, INC. | 6725 | 3 | 2 | 5 | ||||
| HLT53YB-10-7 | HUCK INTERNATIONAL, INC. | 6725 | 3 | 2 | 5 | ||||
| MA4760-5-7 | HUCK INTERNATIONAL, INC. | 58845 | 5 | 9 | 5 | ||||
| ST3M760C5-7 | HUCK INTERNATIONAL, INC. | 58845 | 5 | 9 | 5 | ||||
| HLT53YB-10-7 | HUCK INTERNATIONAL, INC. | 97928 | 5 | 9 | 5 | ||||
| HLT53YC-10-7 | HUCK INTERNATIONAL, INC. | 97928 | 5 | 9 | 5 | ||||
| ST3M760C5-7 | HUCK INTERNATIONAL, INC. | 76301 | 5 | 9 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | W/S: AIRCRAFT, HORNET F/A-18 |
| AASB | FASTENER LENGTH | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.443 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.6335 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWN COUTERSUNK GREATER THAN 135 DEGREES |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| ABAJ | LUBRICATION | SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE | SHANK DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| AAZF | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| CQSX | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATB | WIDTH BETWEEN FLATS | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 24 |
