| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
37.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.323 INCHES MINIMUM AND 1.343 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
CROWN COUTERSUNK GREATER THAN 135 DEGREES |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R56400 OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| ABAJ |
LUBRICATION |
SOLID FILM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAZE |
SHANK DIAMETER |
0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| CQSX |
SHEAR STRENGTH |
9300 DOUBLE POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
HI KOTE 2 SOLID FILM LUBE PER HI-SHEAR SPEC. 292 AND CETYL ALCOHOL LUBE PER HI-SHEAR SPEC. 305 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AATB |
WIDTH BETWEEN FLATS |
0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
73197-HLT311TA-8-15 MANUFACTURERS STANDARD |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TI-SHIELD III MFR REF ALL TREATMENT RESPONSES OVERALL |
| AAJD |
THREAD CLASS |
3A |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
