| MRC |
Requirement Statement |
Characteristics |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
0.957 INCHES MINIMUM AND 0.977 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.781 INCHES MINIMUM AND 0.845 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM BOLT AND 53.0 ROCKWELL C MAXIMUM BOLT |
| CQFM |
HARDNESS RATING |
326.0 KNOOP MINIMUM SLEEVE AND 466.0 KNOOP MAXIMUM SLEEVE |
| AASU |
HEAD HEIGHT |
0.062 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.250 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
STRAIGHT PAN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 FED SPEC SINGLE MATERIAL RESPONSE BOLT |
| MATT |
MATERIAL |
STEEL COMP 1144 MECHANICAL LOCK |
| MATT |
MATERIAL |
STEEL COMP 4130 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 8740 BOLT |
| CQBC |
MINIMUM TENSILE STRENGTH |
112000 POUNDS PER SQUARE INCH |
| AAZE |
SHANK DIAMETER |
0.162 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| CQSX |
SHEAR STRENGTH |
2340 SINGLE POUNDS PER SQUARE INCH |
| AAZF |
|
|
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS90354S0513 GOVERNMENT STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY II,CL2 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY II,CL2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY II,CL2 FED SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM MECHANICAL LOCK |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
