| MRC |
Requirement Statement |
Characteristics |
| ABAF |
EXPANSION DEVICE |
BREAK STEM |
| AASB |
FASTENER LENGTH |
1.117 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.751 INCHES MINIMUM AND 0.813 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
43.5 ROCKWELL C MINIMUM AND 46.5 ROCKWELL C MAXIMUM BOLT |
| CQFM |
HARDNESS RATING |
43.5 ROCKWELL C MINIMUM AND 46.5 ROCKWELL C MAXIMUM NUT |
| AASU |
HEAD HEIGHT |
0.044 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.340 INCHES MINIMUM AND 0.352 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT FILLISTER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE BOLT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE NUT |
| MATT |
MATERIAL |
STEEL COMP 304 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 8740 BOLT |
| MATT |
MATERIAL |
STEEL COMP 8740 NUT |
| CQJX |
NOMINAL THREAD SIZE |
0.188 INCHES |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5639 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| AAZF |
SHANK STYLE |
PIN-RIVET, TAPERED, THREADED |
| FEAT |
SPECIAL FEATURES |
FASTENER LENGTH GIVEN IS INSTALLED DIMENSION |
| THSD |
THREAD SERIES DESIGNATOR |
UNS |
| AAZU |
TIP DIAMETER |
0.207 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 NATIONAL SPEC 3RD TREATMENT RESPONSE AND QQ-P-416 FED SPEC 4TH TREATMENT RESPONSE NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 NATIONAL SPEC 1ST TREATMENT RESPONSE AND QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE II,CLASS 3 FED SPEC 5TH TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE BOLT |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
| AAJD |
THREAD CLASS |
LH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
40 |
