| MRC |
Requirement Statement |
Characteristics |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASB |
FASTENER LENGTH |
1.413 INCHES MINIMUM AND 1.443 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
1.219 INCHES MINIMUM AND 1.282 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM SLEEVE AND 40.0 ROCKWELL C MAXIMUM SLEEVE |
| AAZG |
HEAD MAJOR DIAMETER |
0.376 INCHES MINIMUM AND 0.396 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT |
MATERIAL |
IRON ALLOY 660 LOCKING RING |
| MATT |
MATERIAL |
STEEL COMP 4037 STEM |
| MATT |
MATERIAL |
STEEL COMP 4037 SLEEVE |
| CQBC |
MINIMUM TENSILE STRENGTH |
2100 POUNDS PER SQUARE INCH |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A286 ASSN STD SINGLE MATERIAL RESPONSE LOCKING RING |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AAZE |
SHANK DIAMETER |
0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
3450 SINGLE POUNDS PER SQUARE INCH |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS90353 GOVERNMENT STANDARD AND 29666-B100-T MANUFACTURERS STANDARD |
| SFTT |
SURFACE TREATMENT |
CADMIUM LOCKING RING AND CHROMATE LOCKING RING |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE AND CHROMATE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
